• <progress id="xi9i2"><bdo id="xi9i2"></bdo></progress>
  • <samp id="xi9i2"></samp>
          <menuitem id="xi9i2"><strong id="xi9i2"><u id="xi9i2"></u></strong></menuitem>

            <progress id="xi9i2"><bdo id="xi9i2"><dfn id="xi9i2"></dfn></bdo></progress><menuitem id="xi9i2"><ins id="xi9i2"></ins></menuitem>
            <progress id="xi9i2"><bdo id="xi9i2"></bdo></progress>

          1. News

            News

            How SIP works step by step in New Rock VoIP gateway?

            The following are the recommended step-by-step procedure quoting some of the gateway models from New Rock:
            Step 1. Get the VoIP gateway IP address.
            -  Connect the analog phone to the gateway FXS port.
            -  Pick up the handset and dial “##” to hear the device’s current IP address and port number
            NOTE: For full FXO gateway, you can download Finder App to get the device’s IP address. By default, the HX4G/ MX8G gateway can use DHCP to get IP address, while MX60E/MX120G is the static IP address: 192.168.2.240
            Step 2. Make sure that the PC and the device are on the same network segment
            Step 3. Log in to the gateway configuration web GUI.
            -  Open the browser, enter the gateway IP address that was queried, log in to the gateway configuration interface.
            -  HX4G/MX8G, for example, select Administrator in the user bar drop-down box then enter the device password in the password bar (the default password is a random 8 digits number found on the label of the device while the default password for MX60E is mx60 and for MX120G is mx120)
            -  Enter the CAPTCHA as shown on the log in page.
            Step 4. Register the gateway to the SIP server.
            -  Select Basic > SIP from the configuration screen, enter SIP server address, select per line to register and save.
            -  Select Line > Configuration, select the line you need, click on the registration, enter the registered user name and password then save.
            Step 5. Verify that the gateway registration was successful.
            -  Select Call Status > Call status from configuration interface, check the registration status of the line name and number, and show the registration is successful, the configuration is completed.
            NOTE: If the registration status shown has failed, recheck the following:
            ① The registered server address and port is correct.
            ② The registration of line you chose is open.
            ③ The registered user name and password is correct.
            ④ Check if the gateway can ping the SIP server.

            Contact Us

            New Rockers will do our best to support you
            Contact with Us now

            Copyright ? New Rock Technologies, Inc. All Rights Reserved. 滬ICP備15008515號-1

            国产一区二区三区在线